GSK2126458 (GSK458) 1086062-66-9

.cp_wz tabla {borde superior: 1px sólido #ccc; borde izquierdo: 1px sólido #ccc; } .cp_wz table td {borde derecho: 1px sólido #ccc; borde inferior: 1px sólido #ccc; padding: 5px 0px 0px 5px;} .cp_wz table th {border-right: 1px solid #ccc; border-bottom: 1px solid #ccc; relleno: 5px 0px 0px 5px;} \ n Peso molecular: 505.5 GSK2126458 es un inhibidor altamente selectivo y potente de p110α / β / δ / γ, mTORC1 / 2 con Ki de 0.019 nM / 0.13 nM / 0.024 nM / 0.06 nM y 0.18 nM / 0,3 nM, respectivamente. Fase 1. \ n GSK2126458 inhibe de forma potente la actividad de mutantes activadores comunes de p110α (E542K, E545K y H1047R) encontrados en cáncer humano con Ki de 8 pM, 8 pM y 9 pM, respectivamente. GSK2126458 provoca una reducción significativa en los niveles de pAkt-S473 con una potencia notable en células T47D y BT474 con IC50 de 0,41 nM y 0,18 nM, respectivamente. Además, GSK2126458 conduce a una detención del ciclo celular G1 y produce el efecto inhibidor sobre la proliferación celular en un gran panel de líneas celulares, incluidas las líneas de cáncer de mama T47D y BT474 con IC50 de 3 nM y 2,4 nM, respectivamente. En el modelo, el tratamiento con GSK2126458 da como resultado una reducción dependiente de la dosis en los niveles de pAkt-S473 y exhibió una inhibición del crecimiento tumoral dependiente de la dosis a una dosis baja de 300 μg / kg. Además, GSK2126458 muestra un aclaramiento sanguíneo bajo y una buena biodisponibilidad oral en cuatro especies preclínicas (ratón, rata, perro y mono). \ n \ n

HTRF In vitro Profiling Assays for PI3K Inhibition

Compounds are serially diluted (3-fold in 100% DMSO) across a 384-well polypropylene mother plate from column 1 to column 12 and column 13 to column 24, to yield 11 concentrations for GSK2126458. Columns 6 and 18 contain only DMSO. Once titrations are made, 0.05μL is transferred to a 384-well low-volume assay plate. This assay plate contains three pharmacological controls (known PI3K inhibitors) and 3 assay controls: (1) Enzyme without inhibitor; (2) Buffer minus enzyme, and (3) Buffer minus enzyme plus native PIP3. DMSO is stamped into all wells of columns 6 and 18. PIP3 is added at 40 μM in 1X Reaction buffer (1μL of 200 μM PIP3) to alternating rows of column 18 (wells 18 B, D, F, H, J, L, N, P). The no-enzyme control reactions are run in wells 18 A, C, E, G, I, K, M, O (0.1μL of 100% DMSO). The PI3-Kinase profiling assay is optimized using the HTRF kit. The assay kit contains seven reagents: 1) 4X Reaction Buffer; 2) native PIP2 (substrate); 3) Stop A (EDTA); 4) Stop B (Biotin-PIP3); 5) Detection Mix A (Streptavidin-APC); 6) Detection Mix B (Eu-labeled Anti-GST plus GST-tagged PHdomain); 7) Detection Mix C (KF). PI3Kinase Reaction Buffer is prepared by diluting the stock 1:4 with de-ionized water. Freshly prepared DTT is added at a final concentration of 5 mM on the day of use. Enzyme addition and compound pre-incubation are initiated by the addition of 2.5μL of PI3K (at twice its final concentration) in 1X reaction buffer to all wells using a Multidrop Combi. Plates are incubated at room temperature for 15 minutes. Reactions are initiated by addition of 2.5μL of 2X substrate solution (PIP2 and ATP in 1X reaction buffer) using a Multidrop Combi. Plates are incubated at room temperature for one hour. Reactions are quenched by the addition of 2.5μL of stop solution (Stop A and Stop B pre-mixed at a ratio of 5:1, respectively) to all wells using the Multidrop Combi. The quenched reactions are then processed to detect product formation by adding 2.5μL of Detection Solution to all wells using the Mulitdrop Combi (Detection mix C, Detection mix A, and Detection mix B combined together in an 18:1:1 ratio, i.e.: for a 6000 μL total volume, mix 5400 μL Detection mix C, 300μL Detection mix A, and 300 μL Detection mix B. Note: this solution should be prepared 2 hours prior to use). Following a one hour incubation in the dark, the HTRF signal is measured on the Envision plate reader set for 330nm excitation and dual emission detection at 620nm (Eu) and 665nm (APC).

Ensayo celular: [1]

Cell lines	BT474, HCC1954 and T-47D cells
Concentrations	0-1 μM
Incubation Time	72 hours
Method	BT474, HCC1954 and T-47D (human breast) are cultured in RPMI-1640 containing 10% fetal bovine serum at 37 °C in 5% CO2 incubator. Cells are split into T75 flask two to three days prior to assay set up at density which yields approximately 70-80% confluence at time of harvest for assay. Cells are harvested using 0.25% trypsin-EDTA. Cell counts are performed on cell suspension using Trypan Blue exclusion staining. Cells are then plated in 384 well black flat bottom polystyrene in 48 μL of culture media per well at 1,000 cells/well. All plates are placed at 5% CO2, 37 °C overnight and GSK2126458 is added the following day. One plate is treated with CellTiter-Glo for a day 0 (t=0) measurement and read as described below. GSK2126458 is prepared in clear bottom polypropylene 384 well plates with consecutive two fold dilutions. 4 μL of these dilutions are added to 105 μL culture media, after mixing the solution, 2 μL of these dilutions are added into each well of the cell plates. The final concentration of DMSO in all wells is 0.15%. Cells are incubated at 37 °C, 5% CO2 for 72 hours. Following 72 hours of incubation with GSK2126458 each plate is developed and read. CellTiter-Glo reagent is added to assay plates using a volume equivalent to the cell culture volume in the wells. Plates are shaken for approximately two minutes and incubated at room temperature for approximately 30 minutes and chemiluminescent signal is read on the Analyst GT reader. Results are expressed as a percent of the t=0 and plotted against the GSK2126458 concentration. Cell growth inhibition is determined for GSK2126458 by fitting the dose response with a 4 or 6 parameter curve fit using XLfit software and determining the concentration that inhibits 50% of the cell growth (gIC50) with the Y min as the t=0 and Y max as the DMSO control. Value from wells with no cells is subtracted from all samples for background correction..

Estudio con animales: [1]

Animal Models	Human BT474 tumors implanted in mice.
Formulation	GSK2126458 is dissolved in DMSO and then diluted in water.
Dosages	≤300 μg /kg
Administration	Administered via p.o.
Solubility	1% DMSO/30% polyethylene glycol/1% Tween 80, 18 mg/mL
* Please note that Selleck tests the solubility of all compounds in-house, and the actual solubility may differ slightly from published values. This is normal and is due to slight batch-to-batch variations.

Conversión de diferentes modelos de animales basados ​​en BSA (valor basado en datos del Borrador de Directrices de la FDA)

Species	Baboon	Dog	Monkey	Rabbit	Guinea pig	Rat	Hamster	Mouse
Weight (kg)	12	10	3	1.8	0.4	0.15	0.08	0.02
Body Surface Area (m2)	0.6	0.5	0.24	0.15	0.05	0.025	0.02	0.007
Km factor	20	20	12	12	8	6	5	3

Animal A (mg/kg) = Animal B (mg/kg) multiplied by	Animal B Km
	Animal A Km

Por ejemplo, para modificar la dosis de resveratrol utilizada para un ratón (22,4 mg / kg) a una dosis basada en el BSA para una rata, multiplique 22,4 mg / kg por el factor Km para un ratón y luego divida por el factor Km para una rata. Este cálculo da como resultado una dosis equivalente para ratas de resveratrol de 11,2 mg / kg.

Rat dose (mg/kg) = mouse dose (22.4 mg/kg) ×	mouse Km(3)	= 11.2 mg/kg
	rat Km(6)

Información química

Molecular Weight (MW)	505.5
Formula	C25H17F2N5O3S
CAS No.	1086062-66-9

Storage	3 years -20℃Powder
	6 months-80℃in solvent (DMSO, water, etc.)
Synonyms

Solubility (25°C) *	In vitro	DMSO	100 mg/mL (197.82 mM)
		Water	<1 mg/mL (
		Ethanol	<1 mg/mL (
	In vivo	1% DMSO/30% polyethylene glycol/1% Tween 80	18 mg/mL
* <1 mg/ml means slightly soluble or insoluble. * Please note that Selleck tests the solubility of all compounds in-house, and the actual solubility may differ slightly from published values. This is normal and is due to slight batch-to-batch variations.

Chemical Name	2,4-difluoro-N-(2-methoxy-5-(4-(pyridazin-4-yl)quinolin-6-yl)pyridin-3-yl)benzenesulfonamide

Calculadora de molaridad Calculadora de dilución Calculadora de peso molecular

Grupos de Producto : PI3K / Akt / mTOR > Inhibidor de PI3K